Products

AC Clamp Meter
HCL-36UX Digital Clamp Current Tester for High Voltage
No need to clamp on the overhead distribution line up to 36kV for load current measurement.

FEATURES

  • Display measurement value on your smartphone through blue-tooth connecting.
  • Measurement value can be kept in the our cloud server.
  • In addition to measured values, location registration by GPS, temperature and humidity, date and time can also be saved.
M-730 AC/DC Clamp Milliammeter (CE)(30mmφCT, AC/DC leakage current)
AC/DC Leakage Current Measurements (CE)

FEATURES

  • High sensitive for low range leakage current
  • Suitable for measurement of 4-20mA DC controlled circuit
  • DC mV analog signal output
  • Lowest influence from Magnetization and Terrestrial magnetism
  • Wide measuring ranges - up to DC 1000mA and AC10A
  • Sleeping current measurements for automotive electronics circuit
  • Jaw opening capability 30mmφ
AC Clamp Meter
AC Clamp Meter
M-1141 Leakage Current Clamp Tester (40mmφCT, ACA)(M-1141X, M-1141XR)

FEATURES

  • Auto 5-range : AC 30mA / 300mA / 3A / 30A / 300A
  • CT inside diameter : φ40mm
  • Minimum resolution : 0.01mA
  • Maximum value hold / Data hold function available
  • With filtering switch (which cuts currents above 150Hz)
  • Compliant with EN 61010, CAT-III 1000V / CAT-IV 600V
  • With backlight
MET-10X Clamp Earth Tester with Bluetooth connection
Earth Resistance and Surge impedance measurement by Φ34 mm or Φ80 mm diameter clamps Next clamp-type grounding resistance tester that can connect to a smartphone via Bluetooth and save data on an our cloud server.

FEATURES

  • By connecting to a smartphone or tablet via Bluetooth, it is possible to operate and save data at a remote location (MAX around 10 m)
  • 25 kHz fixed surge impedance measurement
  • Measurement with the big diameter CT of Φ80 mm (Option)
AC Clamp Meter
AC Clamp Meter
ALCL-40L Digital Arrester Clamp Tester

FEATURES

  • ALCL-40 is designed to test the diagnostic of OXIDE SURGE ARRESTER
  • The least influence from the external magnetic field and noise by triple shielding for CT
  • Compliant with IEC6099-5
  • Enabled the measurement for 100nA resolution and harmonics current
  • Motor operation for opening/closing of the jaw with extensional ABS glass fiber insulation rod

GENERAL

  • Lightning arresters are designed to protect a power distribution system by shunting to ground the high voltage surges caused by lightning
  • ALCL-40L measures to warn that an arrester is damaged or deteriorated and should not be energized
Let’s create new concepts of instruments Contact Now
AC Clamp Meter